10GBase Cisco Compatible Fiber Transceiver Module CWDM 1270~1610nm for CWDM-SFP10G-xx
Products Description of CWDM-SFP10G 40KM (1270~1610nm) Series
This Cisco compatible transceiver provides high-capacity, high-bandwidth communication solutions for multiplexed optical networks. It it designed for 10 Gigabit Ethernet links up to 40km over standard single-mode fiber with an LC duplex connector.
There are 18 center wavelengths available from 1270nm to 1610nm with each step 20nm.
The CWDM-SFP10G module is compliant with SFF-8431, SFF-8432, CE, ROHS, FCC and IEEE 802.3ae 10GBASE-ER and 10G Fibre Channel.
The module is with the SFP 20-pin connector to allow hot plug capability. A single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal to the receiver.
Functional Specification
| Compatible Brand |
Cisco |
P/N(Part No.) |
CWDM-SFP10G-xx |
| Vendor |
Gigaopto |
Rate Category (Gbps) |
10GBASE |
| Wavelength |
1270nm~1610nm |
Distance |
40km @ G.652 |
| Interface |
Dual LC PC |
Media |
single-mode fiber |
| LD Component |
CWDM DFB |
PD Component |
PIN photo-detector |
| Voltage Supply |
3.3V |
Rx Sensitivity |
<-16 dBm |
| TX Power 1 (dBm) |
0 ~ 5dBm@1270nm to 1450nm |
Rx Overload |
>-8 dBm |
| TX Power 2 (dBm) |
-1 ~ 4dBm@1470nm to 1610nm |
Extinction Ratio |
>3.5 dB |
| Power Dissipation |
<1.5 W |
Temperature Range |
0 to 70°C |
| DOM/DDM |
With |
|
|
Notice: When the long-reach transceiver is used in short-distance transmission, please matched with appropriate attenuator according to the table.
| Distance |
≤ 5km |
≤ 10km |
≤ 15km |
| Attenuator |
7dB |
5dB |
3dB |
Ordering Information: CWDM-SFP10G 40km (1270~1610nm) Series
| Part Number |
Wavelength Step |
TX Power |
Max Reach (km) |
Connector |
Pull Tab Color |
| CWDM-SFP10G-1270 |
1270nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Light Purple |
| CWDM-SFP10G-1290 |
1290nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Sky Blue |
| CWDM-SFP10G-1310 |
1310nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Yellow Green |
| CWDM-SFP10G-1330 |
1330nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Yellow Ocher |
| CWDM-SFP10G-1350 |
1350nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Pink |
| CWDM-SFP10G-1370 |
1370nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Beige |
| CWDM-SFP10G-1390 |
1390nm |
0 ~ 5dBm |
40km |
Dual LC PC |
White |
| CWDM-SFP10G-1410 |
1410nm |
0 ~ 5dBm |
40km |
Dual LC PC |
Silver |
| CWDM-SFP10G-1430 |
1430nm |
0 ~ 5dBm |
30km |
Dual LC PC |
Black |
| CWDM-SFP10G-1450 |
1450nm |
0 ~ 5dBm |
30km |
Dual LC PC |
Yellow Orange |
| CWDM-SFP10G-1470 |
1470nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Gray |
| CWDM-SFP10G-1490 |
1490nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Volet |
| CWDM-SFP10G-1510 |
1510nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Blue |
| CWDM-SFP10G-1530 |
1530nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Green |
| CWDM-SFP10G-1550 |
1550nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Yellow |
| CWDM-SFP10G-1570 |
1570nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Orange |
| CWDM-SFP10G-1590 |
1590nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Red |
| CWDM-SFP10G-1610 |
1610nm |
-1 ~ 4dBm |
40km |
Dual LC PC |
Brown |
| Note |
The maximum transmission distance is 30km owing to dispersion influence @1430nm/1450nm Channel |
Features
- Functionally identical to Cisco CWDM-SFP10G-xx
- Hot-pluggable SFP+ footprint
- Supports 9.95 to 10.5 Gb/s bit rates
- Compliant with SFP+ MSA standard SFF-8431
- Compliant to 802.3ae 10GBASE-ER
- 18-Wavelength CWDM DFB transmitter from 1270nm to 1610nm, with step 20nm
- Maximum link length of 40km on SMF
- Uncooled CWDM DFB laser, PIN photodiode
- Build-in Digital Diagnostics Monitoring (DDM) through Serial Interface comply with SFF-8472
- Duplex LC receptacle
- Commercial temperature range 0°C to 70°C
- Single 3.3V power supply
- Power dissipation < 1.5 W
- RoHS compliant and lead-free
- Class 1 Laser International Safety Standard IEC-60825 Compliant
Application
- 10GBASE-ER/10GBASE-EW CWDM Ethernet
- 10G Fiber Channel
- 10GE Data Center Switches and Routers
- 10GE Network interface cards and Fiber Media Converters
FAQ
Q: Are you trading company or manufacturer?
We are direct manufacturer. We can do OEM/ODM business. Our company mainly produces SFP Transceiver.
Q: What are your main products?
PON, SFP, SFP+, SFP28, QSFP+, QSFP28, CFP/CFP2/CFP4, FC, Video SFP, 1x9, XFP, x2, Xenpak, SFF optical transceiver series, as well as Active Optical Cable, Direct Attach Cable, OSA and so on. etc.
Q: Why choose GigaOpto?
1. Prompt delivery and remarkable services
2. Competitive selling prices
3. Rich experience in OEM & ODM co-operation
4. 100% new materials for production and 100% reliable quality
Q: How can you guarantee the quality?
GigaOpto has rich experience in providing trusted quality service to customers, with a perfect quality management system, all of our products were 100% tested before shipment.
Q: What about the warranty?
3-year warranty for new products, and lifetime technical support.
Q: Can I have a sample order? What is your MOQ?
Yes, a sample order is available for your testing and checking quality. Mixed samples are acceptable, our MOQ is just one piece.
Q: Could I use our own logo, label and package?
Yes, we can help you to market your own brand of 3rd party transceivers
OEM customization : Your LOGO (Labeling); Your P/N (Labeling);Your S/N (Labeling);
EEPROM information: Vendor name: customized your information; P/N: customized your information; S/N: customized your information.
Q: What're your payment terms?
We accept T/T, Western Union, Paypal, L/C, etc. For samples: 100% payment. Formal order: 30%as deposit, 70% balance payment before shipment. Gigaopto may be able to agree to more flexible terms with regular customers or customers with special large orders or products.
Q: How do you ship the goods and how long does it take to arrive?
We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
Product Tags:
|
|
10GBase Cisco Compatible Fiber Transceiver Module 1270-1610nm For CWDM-SFP10G-Xx Images
|
